Clik here to view.
How do I assign an IP address to the data ports of the D-Link SAN?
This article teaches you how to assign an IP address to the data ports of the D-Link SAN. Step 1: Access the SAN through the GUI by typing the Management Port IP of the SAN into a web browser and log...
View ArticleThe D-Link Access Point(DWL-2100AP,DWL-7100AP) DHCP Server Configure
This FAQ is for the DWL-2100AP and DWL-7100AP access points about DHCP Server Configure. Step 1: Open a web browser and type the IP address of the access point in the address bar (default is...
View ArticleClik here to view.
D-Link DGS-3612G 12-Port Gigabit SFP Standalone L3 Switch Port IP Address And...
Please Login the D-Link DGS-3612G Switch,default IP is 10.90.90.90. The IP Address may initially be set using the console interface prior to connecting to it through the Ethernet. If the Switch IP...
View ArticleClik here to view.
How to enable DHCP on D-Link adapter?
This article teaches you how to setup D-Link DHCP settings on the computer. Step 1: Open the Control Panel on your PC. Select Network Connections. Using Category view: You will then need to select...
View ArticleClik here to view.
D-Link DES-3800 xStack Series IP Address Assignment
D-Link IP Address Assignment(D-Link DES-3800 Series) Each Switch must be assigned its own IP Address, which is used for communication with an SNMP network manager or other TCP/IP application (for...
View ArticleConnecting the D-Link Switch DWS-3026 to the Network
After you perform the physical hardware installation, you need to connect the D-Link Unified Switch to the network. The default IP address of the switch is 10.90.90.90/8, and DHCP is disabled by...
View ArticleClik here to view.
How to change the LAN IP address of my D-Link Netdefend firewall?
Note: You may consider binding a secondary IP address to one NIC that matches the new network segment for this configuration ahead of actual firewall configuration. Step 1: Open a web browser and type...
View ArticleClik here to view.
How to change the IP address on D-Link DI series wireless router?
This FAQ is for the D-Link DI-514, DI-524, DI-604, DI-614+, DI-624, DI-624S, DI-774, and DI-784. Step 1: Open your web browser and type the IP address of the D-Link wireless router in the address bar...
View ArticleClik here to view.
How to renew or release the IP address(DHCP) for my D-Link network adapter?
Note: The following FAQ demonstrates the usage of the Command Prompt in Windows XP. Step 1: Click Start and select Run. Step 2: In the Run command box, type cmd and click OK. Step 3: In the command...
View ArticleClik here to view.
How to change the IP address on my D-Link DWL-7100AP 108MBPS Access Point?
To change or obtain an IP address automatically for the D-Link DWL-7100AP follow the steps below: Step 1: Open your web browser and type the IP address of the access point in the address bar. The...
View ArticleClik here to view.
How to Check IP Address and Assign an IP Address on D-Link DGL-5500L router...
Check your IP address on D-Link DGL-5500L After you install your new D-Link wireless adapter and have established a wireless connection, by default, the TCP/IP settings should be set to obtain an IP...
View ArticleClik here to view.
How to change the Management IP address of my D-Link DSN Series SAN?
Step 1: Open a browser and log into your DSN-Series SAN (the default IP address is http://192.168.1.1) Step 2: Click on Network Settings on the left hand side of the screen Step 3: Select the...
View ArticleClik here to view.
How to setup an IP address and default gateway on D-Link DES-3010FA/GA switch...
Below is the syntax to configure an IP address and default gateway on the DES-3010FA/GA switch via the CLI. Note: The copy running-config startup-config comamnd will save all configuration changes.
View ArticleClik here to view.
How do I change the Management IP address of D-Link DSN-6000 Series SAN?
To change the management IP address of your 6000 series SAN storage box, plese follow the steps below: Step 1. Open your browser and type the IP address of your Storage Box ( http://192.168.0.32 is...
View ArticleClik here to view.
How to find the IP address of D-Link DCS-2330L and access the web-based user...
If your camera is connected to your router as a DHCP client, the IP address of your camera will change depending on the DHCP address assigned to it by your router. In order to access the web-based user...
View ArticleWhy can I not pull a DHCP IP address from my D-Link switch?
Your D-Link switch has no built in DHCP server, meaning it does not have the capability to issue IP addresses. Please check your DHCP server to ensure that it is functioning properly. In most cases...
View Article
